Все международные тренажёры на платформе IG MARITIME — бесплатны для всех моряков. Зарегистрируйтесь один раз, чтобы сохранять свой прогресс и готовиться к рейсу без ограничений!

CD0416. Fuel oil bunkering, Understanding test results

Поиск в разделе

Выберите набор вопросов и начните обучение или экзамен.

О подготовке в этом разделе

Банк Seagull CBT разделён на учебные модули: безопасность, судовые операции, техническое обслуживание и другие темы. Названия и коды модулей сохранены, чтобы вы могли выбрать нужную тему подготовки.

В наборе «Seagull CBT — CD0416. Fuel oil bunkering, Understanding test results» — 22 вопросов. Доступен 1 набор.

Обучение

В обучении нет таймера: после ответа вы сразу увидите результат и правильные варианты. Можно вернуться к вопросу и повторить тему.

Экзамен

Экзамен длится до 60 минут и включает до 50 вопросов из выбранного набора. Правильные ответы и результат доступны после завершения.

Примеры вопросов и ответов

Это примеры из опубликованного набора. Для последовательной подготовки выберите «Обучение», для проверки знаний — «Экзамен».

According to this module, if distillate fuel onboard is found to have a high Acid number, what should you do?

Один правильный вариант

  • Send a sample to a specialist testing agency to check for corrosion and/or chemical contamination.✓ Правильный ответ
  • Increase the rate of cylinder lubrication oil feed, and keep the main engine cooling water temperatures high.
  • Add an alkali to the fuel.
  • Water-wash the fuel using the separators.
Why are catalytic fines so problematic when present in residual fuel oil? Select the ONE correct answer.

Один правильный вариант

  • They are small and difficult to remove, but very hard and cause rapid wear of engine parts.✓ Правильный ответ
  • They cannot be burned and therefore lead to sticky deposits in the combustion chambers of the engine.
  • They are an indication that the fuel has not been completely refined and may therefore give poor combustion.
  • They are an indication that the fuel oil has been contaminated with other waste oils, such waste lubricating oil, which will give poor combustion.
Why is the Micro Carbon Residue of a distillate fuel important? Select the ONE correct answer.

Один правильный вариант

  • It is a measure of how much energy is released when the fuel is completely burned.
  • It is an indication of how likely it is that filters will be clogged, or need to be changed or back-flushed.
  • It is a measure of how abrasive the deposits left in the engine cylinder will be.
  • High levels result in more carbonaceous deposits in the engine.✓ Правильный ответ
The condition of distillate fuels can often be quickly assessed by a visual inspection of the sample, which should be bright and clear. At what temperature should this test be carried out? Select the ONE correct answer.

Один правильный вариант

  • Between 10 and 25 degrees Celsius.✓ Правильный ответ
  • The sample should be cooled to below 10 degrees Celsius.
  • The sample should be warmed to at least 30 degrees.
  • The sample should be warmed to within 10 degrees Celsius of its closed flash point.
According to this module, how should Type 2 and 3 ECA compliant fuels be treated? Select the ONE correct answer.

Один правильный вариант

  • They should be treated as residual heavy fuel oil of corresponding grade, particularly with regard to heating.✓ Правильный ответ
  • They should be treated as distillate fuels.
  • They should not be heated in storage.
  • They should not be centrifuged, as this causes the constituents to separate.

Перед подготовкой

Нужна ли регистрация, чтобы начать?

Гостевой доступ — 23 минуты. После бесплатной регистрации можно продолжать без ограничений, сохранять прогресс и просматривать ошибки в личном кабинете.

На каком языке будут вопросы?

Вопросы и варианты ответа сохраняют язык исходной базы. Язык интерфейса можно переключить отдельно.

Можно ли использовать результат как официальный документ?

Нет. Это самостоятельная подготовка. Результат тренажёра не заменяет экзамен, свидетельство или проверку знаний у уполномоченной организации.