IG MARITIMEMade by Seafarers for Seafarers

All international training tests on IG MARITIME are free for every seafarer. Register once to save your progress and prepare for your next voyage without limits!

CD0117. Integrated Survey Programme - ISP

Search this section

Choose a question set and start learning or take an exam.

About this collection

The Seagull CBT bank is organised into modules covering safety, shipboard operations, maintenance and other topics. Original module names and codes are retained to help you find the topic you need.

“Seagull CBT — CD0117. Integrated Survey Programme - ISP” contains 36 questions across 1 collection.

Learning

Learning mode has no timer. After answering, you see feedback and the correct options. You can return to a question and repeat a topic.

Exam

A practice exam lasts up to 60 minutes and includes up to 50 questions from the selected collection. Correct answers and results appear after completion.

Sample questions and answers

These examples come from the published collection. Choose Learning to study questions in sequence, or Exam to check your knowledge.

Where would you look for cracks in the side ballast tanks in the first place?

One correct answer

  • At the tank top longitudinals connection to the web frames.
  • At ship side longitudinals connection to the web frames below waterline.✓ Correct answer
  • At the longitudinal bulkhead longitudinal connection to the web frames.
Below you have find an example of coating condition in a ballast tank. Provided this condition is representative throughout the tank what would be the correct rating according to your judgement?

One correct answer

  • Good.
  • Fair.✓ Correct answer
  • Poor.
What is the classification in the SiO phase?

One correct answer

  • To verify that the standard of ship in operation (SiO) acceptable after conversion.
  • Verify that the standard of the ship is acceptable after damage repairs.
  • To verify that the standard of the ship is acceptable through a system periodical surveys.✓ Correct answer
  • To make sure that the vessel is well maintained.
Similar to Classification Society, the Owner also has acceptance criteria to be used when deficiencies are found. These acceptance criteria should normally be somewhat stricter than the class. Where do you find Owner’s acceptance criteria?

One correct answer

  • In the working guidance by chief officer.
  • In the PIMS manual on board.✓ Correct answer
  • In the ISM system, Reg. 10.
For efficient cathodic protection of ballast tanks which of the following does not apply:

One correct answer

  • Anodes are to be properly attached.
  • Anodes are to be submerged in water.
  • Anodes are to be painted.✓ Correct answer
  • Consumed anodes are to be replaced.
  • Sufficient number of anodes are to be provided.

Before you start

Do I need to register to start?

Guest access lasts 23 minutes. Free registration lets you continue without limits, save progress and review mistakes in your account.

What language are the questions in?

Questions and answer options retain the language of the original bank. You can change the interface language separately.

Can I use my result as an official document?

No. This is independent practice. A result does not replace an examination, certificate or knowledge check by an authorised organisation.